两级滤波结构的导航卫星天线阵抗干扰算法

干扰和多径是影响接收机导航定位性能的两个主要因素。针对卫星导航接收机的抗干扰问题,提出了一种基于两级滤波结构的卫星导航天线阵抗干扰算法。第一级滤波采用功率倒置算法抑制干扰,通过相关解扩提高卫星信号的信噪比,并估计出其空间特征矢量。第二级滤波用估计得到的卫星信号空间特征矢量对第一级滤波输出信号进行加权处理,从而形成指向卫星信号方向的主波束来进一步提高信噪比。仿真结果表明,该算法的性能明显优于功率倒置算法,且非常接近传统的波束形成算法,不需要阵列校正以及姿态测量单元辅助,其实现代价远小于传统的波束形成算法。     

Dual sourcing: Responsive hedging against correlated supply and demand uncertainty

This article analyzes dual sourcing decisions under stochastically dependent supply and demand uncertainty. A manufacturer faces the trade‐off between investing in unreliable but high‐margin offshore supply and in reliable but low‐margin local supply, where the latter allows for production that is responsively contingent on the actual demand and offshore supply conditions. Cost thresholds for both types of supply determine the optimal resource allocation: single offshore sourcing, single responsive sourcing, or dual sourcing. Relying on the concept of concordance orders, we study the effects of correlation between supply and demand uncertainty. Adding offshore supply to the sourcing portfolio becomes more favorable under positive correlation, since offshore supply is likely to satisfy demand when needed. Selecting responsive capacity under correlated supply and demand uncertainty is not as straightforward, yet we establish the managerially relevant conditions under which responsive capacity either gains or loses in importance. Our key results are extended to the broad class of endogenous supply uncertainty developed by Dada et al. [Manufact Serv Operat Mange 9 (2007), 9–32].© 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

恒压变频控制设备在消防水灭火系统中的应用

分析了传统消防水灭火系统存在易锈死难改造等问题,介绍了恒压变频供水系统的基本工作原理和设计思路,论证了恒压变频供水系统在消防水灭火系统中应用的可行性,研究了将恒压变频控制设备应用到消防水灭火系统中应注意的几个问题,为改进消防水灭火系统提供了又一方法。     

基于级库存的维修器材整合供应策略研究

针对传统器材供应模式效率低的问题,借助供应链管理的思想提出了多需求点整合供应模式,并建立了基于级库存策略的整合优化模型,对成本各组成部分分析求解,得到了最优总成本对应的策略参数,其中总成本考虑了供应中心补货成本、库存持有成本、供应成本和供应延迟成本．最后通过算例与直接供应策略进行了比较,证明了整合供应策略的有效性．     

基于串联谐振变换器的感应式电能传输系统研究

摘要：为提高装甲车辆蓄电池充电装置的环境适应性和安全性,解决传导式电能传输不适合旋转部件的难题,提出一种基于串联谐振式变换器的感应式电能传输系统．该系统是采用旋转式耦合器,以耦合器的漏感为谐振电感,应用全桥式串联谐振功率变换器的电能传输系统．利用所设计的感应式电能传输试验装置,进行了不同气隙条件下的功率传输和初、次级电流对比试验,试验结果表明：随着耦合器气隙增大,电能传输效率呈现斜率渐缓式减小趋势,励磁电感减小,励磁电流变大,耦合器的铁损增加,系统的功率因数降低．     

协同OFDM放大前传空时编码系统中的功率分配

针对由源节点和单个中继节点形成的协同正交频分复用( OFDM) Alamouti空时块码系统,分析了放大前传(AF)模式下的系统容量,给出了解析表达式.考虑节点功率独立约束的应用场景,提出了分步迭代的功率分配算法( SIPAA)来提高系统容量.该算法的核心思想是在每次迭代中,分步对源和中继节点分别进行注水功率分配,注水...     

多目标的有源压制干扰功率分配方法

在复杂电磁环境下,为有效干扰敌方威胁雷达,必须合理分配干扰功率。探讨了在自卫有源压制式干扰中,干信比对发现概率的影响,建立了干扰功率分配模型,提出了在面对多个目标时干扰方应遵循的功率分配原则,从而实现干扰功率的优化利用。计算表明,该方法具有较强的实用性和可行性。     

信息化作战轮式车辆装备保障力量的思考

随着信息技术及高技术武器装备的发展,信息化作战对轮式车辆装备的要求越来越高,轮式车辆装备保障的重要性也日渐突出,轮式车辆装备保障力量研究的必要性也不断加强。在深入分析信息化作战轮式车辆装备保障力量概念和主要特征的基础上,对信息化作战轮式车辆装备保障力量的生成模式和编组方式进行了思考。     

A facility reliability problem: Formulation,properties, and algorithm

Having a robustly designed supply chain network is one of the most effective ways to hedge against network disruptions because contingency plans in the event of a disruption are often significantly limited. In this article, we study the facility reliability problem: how to design a reliable supply chain network in the presence of random facility disruptions with the option of hardening selected facilities. We consider a facility location problem incorporating two types of facilities, one that is unreliable and another that is reliable (which is not subject to disruption, but is more expensive). We formulate this as a mixed integer programming model and develop a Lagrangian Relaxation‐based solution algorithm. We derive structural properties of the problem and show that for some values of the disruption probability, the problem reduces to the classical uncapacitated fixed charge location problem. In addition, we show that the proposed solution algorithm is not only capable of solving large‐scale problems, but is also computationally effective. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

永磁无刷直流电机驱动器并联系统环流的抑制

驱动器并联方式能有效扩大驱动容量,但该方式容易引入环流。为了抑制环流,分析了两个独立电源供电的两台驱动器并联结构系统,阐述了环流的特性,并提出了基于环流反馈的控制结构。这种控制结构通过环流的反馈,只需要控制调整其中一台驱动器,就可减小两台驱动器输出电压的差异,实现环流抑制。仿真结果表明:这种控制结构降低了控制的复杂性,能够抑制环流,实现独立电源供电的无刷直流电机驱动器并联。